• Solar collector for hot water under pressure Total Clima HP 160 LUX



Total Clima solar systems are manufactured under the strict control of the quality of the materials used and the whole production cycle. By in this way we guarantee our customers a product with the best performance on the market and trouble-free long-term operation. All our products are equipped with a European quality certificate.

No matter where the solar hot water systems will be installed, Total Clima will provide maximum comfort to the users, as this type of solar systems eliminates the need for displacement and can be installed in any convenient place.




We offer to your attention a product of exceptional quality, made to our order with the most high-tech production machines meeting the strictest European requirements. The pressure in the boiler is the same as in the water supply network, due to which the circulation of hot water is smooth. This allows any solar system of this type to be installed in any place, in accordance with the sunshine during the day. Another main advantage of Total Clima pressure solar collectors is the use of vacuum "Heat pipe" pipes. The system works through a new generation of vacuum tubes called Tree Target, covered with a highly efficient three-layer coating that absorbs 98% of the three spectra of sunlight. Unlike thermosyphon systems, in the event of a vacuum tube breakage in solar pressure collectors, they continue to function fully with minimal loss of efficiency.

 



Water tank - The water tank or the so-called boiler of the high-quality solar collectors for hot water from Total Clima is made of high-quality stainless steel for food needs with a thickness of 1.5 mm. For maximum thermal insulation, the water tank is covered with 55 millimeters of polyurethane foam, which has exceptional parameters and guarantees efficient storage of hot water for a long time. The different models of solar water heaters vary with a capacity of 150 to 500 liters.

 



 Vacuum tubes - highest efficiency thanks to Tree Target technology - Total Clima solar heating tubes are three-layer "Heat pipe" vacuum tubes that absorb 98% of the three spectra of the sun's rays, converting solar energy into heat. Aesthetic design combined with high efficiency, these are the "Heat pipe" type in Total Clima solar collectors.  They are two concentrically arranged glass tubes and a vacuum between them. The surface of the inner tube is covered with a light-absorbing layer, allowing maximum absorption of sunlight, minimum emission / less than 5% / and high efficiency. In the center of the Heat pipe is a hollow copper tube containing a fluid that begins to boil at 40 degrees. When the water boils, steam is created, which raises the heat up the pipe, after which, when it reaches the top of the pipe, the heat is transferred to the water in the water tank. This method of heat transfer also works in winter conditions, as it starts at a very low water boiling temperature, and the vacuum tubes can maintain a positive temperature of all elements involved in the process. The pipes of the solar collectors for hot water have a minimum of 15 years of efficiency and withstand hail with the size of ice pieces up to 25 mm.

 


Stainless steel stand - The stainless steel structure of Total Clima solar hot water collectors is suitable for installation on a flat horizontal roof, providing a slope of the pipes of 45 degrees. Extremely easy to assemble and install. Stainless steel practically does not age, which guarantees extremely long service life in harsh climatic conditions.



Heater - The set also includes an electric heater 1500 W with built-in thermal protection, in case it is necessary to reheat the water in the solar water heater.



Computer control - For maximum comfort and convenience, the Total Clima solar system kit also includes computer control, which allows complete control over your solar system. Through it you can monitor and regulate the water temperature. Thanks to the computer control, you have the ability to turn on and off the auxiliary heater in different time ranges or when the water temperature drops below a certain value. In this way you can provide hot water at any time, regardless of weather conditions.

 



Safety valve - safety valve for temperature and pressure, protects the boiler from overheating and high pressure. It is a mandatory element of the installation, as it ensures the prevention of severe accidents.Safety valve - safety valve for temperature and pressure, protects the boiler from overheating and high pressure. It is a mandatory element of the installation, as it ensures the prevention of severe accidents.

 



Solar systems
Type of solar system: Pressure (closed)
Stand: Stainless steel
Insulation of water tank: 55 mm polyurethane foam
Water container
Type: Stainless steel
Boiler volume: 160 liters
Maintains water temperature up to: 72 hours
Magnesium anode against solid water: Yes
Vacuum tubes
Number of vacuum tubes: 15 pieces
Technology / Material Vacuum Pipes: Heat Pipe Borosilicate glass 3.3 Tree Target technology
Vacuum Pipe Size: 1800 x 58 мм
Absorbent surface: Al-N/Al
Extras
Electric heater: Yes
Computer Management: Yes
Origin : China
Safety valve Yes

Write a review

Please login or register to review

Solar collector for hot water under pressure Total Clima HP 160 LUX

  • Brand: Total Clima
  • Product Code: 228 Слънчев колектор под налягане Total Clima HP 160 LUX
  • Availability: In Stock
  • 1,478.00лв.
  • 1,299.00лв.


Tags: Solar, collector, for, hot, water, under, pressure, Total Clima, HP 160 LUX